background image

 

- 16 - 

PRODUCT WARRANTY 

For 7 years from the date of installation, this product will be repaired, or replaced 

free of charge, if defective in material or workmanship.   

ADDITIONAL WARRANTY ON PARTS Replacement parts for any defective parts on this product will be furnished, free 

of charge. Any costs for professional installation are included.   

WARRANTY RESTRICTION This Garage Door Opener Warranty does not cover light bulbs or fuses, which are 

expendable items, or repair parts necessary because of operator abuse or negligence, including the failure to adjust 

and 

operate this garage door opener according to instructions contained in the owners’ manual. This warranty also 

does not cover any problems caused by interference or impact damage and does not cover remote controls.   

This warranty remains valid providing the door has been serviced at least every 3 years by any professional garage 

door company since the installation of this opener. Proof of service will be requested and failure to produce this may 

void your warranty.   

Warranty is void if damage or premature wear to the opener is sustained by a broken, unbalanced, worn or damaged 

garage door.   

Original purchase receipt / Invoice is required to process a warranty claim.   

If a technician is requested to attend and rectify the issue and it is reasonably deemed to be caused by other factors 

other than a product fault the customer agrees that they may be charged a call out fee, plus any parts required to 

complete the repair. 

Liability 

 Australia only 

 

Under no circumstances shall the Seller be liable for consequential, incidental or special damages arising in   

connection with the use, or inability to use, the Unit. In no event shall the Seller's liability for damages or injury arising 

from breach of law or contract or for negligence, exceed the cost of repairing or replacing the Unit or refunding the 

purchase price of the Unit. Under Division 2 Part V of the Trade Practices Act, 1974, certain warranties and conditions 

(Implied Terms) are implied into contracts for the supply of goods or services if the goods or services are of a kind 

ordinarily acquired for personal, domestic or household use or consumption. Liability for breach of those Implied Terms 

cannot be excluded or limited and the limitations and exclusions above do not apply to the Implied Terms. Except for 

the Implied Terms and the warranties set out above, the Seller excludes all warranties and conditions implied by 

statute, at law, in fact or otherwise.   

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a 

replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You 

are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does 

not amount to a major failure.   

If you believe you have a faulty product you may submit a warranty request by contacting the company listed below. 

Summary of Contents for 600N




















Reviews: