Jaypro Retractable Practice Cages - Installation and Operating Instructions
www.jaypro.com / (800) 243-0533 / 976 Hartford Tpke, Waterford, CT 06385 USA
SUBJECT TO CHANGES IN DESIGN AND MANUFACTURING
COPYRIGHT 2017 JAYPRO SPORTS, LLC. ALL RIGHTS RESERVED
BBC-700 REV B, RELEASED 12-29-2017
Sheet 20 of 26
ATTACH THE ANCHORING EYE BOLTS TO THE
FRAME AND SECURE:
1.
There are 21 connection points on the cage.
2.
Each connection point is a 3/8 x 5 Eyebolt
with washers and a nylon lock nut.
3.
NOTE: You will be required to drill through the
tee fitting at the end hoist cable in 2
locations. See Figure 23 for attaching the
eyebolt at these locations. Hole must be
drilled vertical or cage will sag on the end.
CORRECT
U-BOLTS OF ALL CLIPS ON
DEAD END OF CABLE
DEAD END
OF CABLE
DEAD END
OF CABLE
INCORRECT
CLIPS ARE STAGGERED
DEAD END
OF CABLE
INCORRECT
U-BOLTS OF ALL CLIPS ON
LIVE END OF CABLE
"NEVER SADDLE A DEAD HORSE"
3/8-16 X 5" EYEBOLT (HB5048)
1/8" WIRE ROPE CABLE THIMBLE (HM6169)
3/8-16 HEX NUT SUPPLIED WITH EYEBOLT
3/8 FLAT WASHER (HW2050)
3/8 FLAT WASHER (HW2050)
3/8-16 NYLON LOCK NUT (HN265)
Figure 24: Rendering of Eyebolt
Thru Tee Fitting Cable Attachment
(2 Locations)
CAGE CROSSPIPE
1/8" AIRCRAFT CABLE 7X19
GALVANIZED (RC5017)
1/8" WIRE ROPE
CABLE CLAMP (HM403)
2 REQUIRED PER
TEMINATION POINT
CAGE CROSSPIPE
TEE FITTING
(BBC-T)
3/8 FLAT WASHER (HW2050)
3/8-16 NYLON
LOCK NUT (HN265)
3/8-16 X 5"
EYEBOLT (HB5048)
3/8 FLAT WASHER (HW2050)
1/8" WIRE ROPE CABLE
THIMBLE (HM6169)
1/8" WIRE ROPE
CABLE CLAMP (HM403)
2 REQUIRED PER
TEMINATION POINT
1/8" AIRCRAFT CABLE 7X19
GALVANIZED (RC5017)
Figure 25: Rendering of Typical
Eyebolt Cable Attachment
(19 Locations)
Figure 23: Rendering of Proper Cable
Clamp Assembly
THREADS OF ALL EYEBOLTS SHOULD NOT STICK
DOWN MORE THAN A FEW THREADS.
ADJUST ACCORDINGLY OR TRIM EYEBOLTS.
