Jaypro Retractable Practice Cages - Installation and Operating Instructions
www.jaypro.com / (800) 243-0533 / 976 Hartford Tpke, Waterford, CT 06385 USA
SUBJECT TO CHANGES IN DESIGN AND MANUFACTURING
COPYRIGHT 2017 JAYPRO SPORTS, LLC. ALL RIGHTS RESERVED
BBC-700 REV B, RELEASED 12-29-2017
Sheet 13 of 26
INSTALL THE FIRST SEGMENT OF DRIVE PIPE:
1.
Insert the Swaged end of one section of drive pipe into the winch drum and push towards the
first DCP-A.
- Pipe may be inserted in opposite direction if clearance is an issue.
2. Continue to insert the drive pipe segment through the DPC-A and continue the edge of the
pipe to end 27-3/4 beyond the center of the DPC-A.
3. Temporarily secure the drive pipe section to the winch with Duct Tape to prevent it moving
unexpectedly.
6"
12"
REFERENCE
DRIVE PIPE CARRIER (DPC-2)
1/2-13 HEX NUT (HN704)
1/2-13 X 1-3/4" COUPLING NUT (HN5016)
1/2-13 X 18" THREAD ROD (SR5276)
1/2-13 FLANGE NUT (HN5038)
1-5/8" SQ FLAT PLATE (HM6135)
18" L SINGLE STRUT
CHANNEL (SR5239-18)*
SINGLE STRUT BEAM
CLAMP (HM6157)
*
*NOTE: ATTACHMENT METHOD MAY VARY
DEPENDING ON SUPPLIED CAGE SUPPORT KIT
(PURCHASE SEPARATELY)
Figure 11: Rendering of Drive Pipe Carrier Assembly, DPC-A (Section B-B)
1/2" LOCK WASHER (HW1245)
