Jayco Eagle TT 2020, Owner'S Manual

Page: 59 / 201

Section 4: Vehicle Operation
57
OneControl Touch Panel
1. Press the button at the bottom of the touch panel
to power up the display.
2. Select MyRV Control Panel from the menu list-
ing on the screen.
3. Then select the Leveler icon.
The following functions can be operated using the
OneControl Touch Panel inside the RV. Refer to the
Lippert Ground Control 3.0 manual for complete in-
structions.

Standard Mode and Menu

Basic Jack operation

Unhitching instructions

Auto Leveling

Hitch Recognition
OneControl App: (for your phone or tablet)
1. Download the OneControl App for your device from Google Play Store or Itunes.
2. To access the OneControl App, ensure there is
power to the RV’s wireless network hub.
3. Navigate to the device’s Wi-Fi settings (on the
phone, tablet, etc). Turn the wireless feature on
and connect to the MyRV wireless network.
4. A password will be required to access the network.
The password is found on the RV’s wireless hub (8
capital alpha characters).
5. Open the OneControl App on the phone or tablet.
6. The App will request the user to “Agree” with a
license agreement, connect to the MyRV system
by entering the PIN (default is 1,2,3,4 for OneControl Touch Panel). Then it will prompt
you to create a new PIN and then re-enter the new PIN.
7. The App will now display all functions. Choose Leveler.
The following functions can be operated using the OneControl App. Refer to the Ground
Control 3.0 manual for complete instructions.
NOTE: The PIN is not needed or asked for if the tablet is attached
to the docking station and connected to the USB cable inside the RV.
NOTE: If the AUTO LEVEL sequence does not perform as
described above, place the system in manual mode and test that the
jacks operate correctly by using the OneControl touch panel inside
the RV.