Jayco Eagle TT 2020, Owner'S Manual

Page: 54 / 201

Section 4: Vehicle Operation
52
1. The system will retract all stabilizer jacks and the rear leveling jacks, then extend or
retract the tongue jack until proper connection height is achieved. Display will read
“
Auto Reconnect in Progress
”. (M below)
2. When the system has completed the “Auto Reconnect” function the display will read
“Auto Reconnect Successful” and a beep will sound. (N below)
TONGUE JACK RETRACT:
1. Press HOME SCREEN. (O below)
2. Press and hold RETRACT (P below) until the unit can be connected to the tow vehicle.
3. Connect the unit to the tow vehicle.
4. Press AUTO MODE. (Q below)
5. Press TONGUE JACK RETRACT. (R below)
1. Press OK (S below) to begin “
Tongue Jack Retract
” or STOP to make a new selection.
The display will read “
Tongue Jack Retract in Progress
”.
2. When the jack has been fully retracted the display will read “
Tongue Jack Retract
Successful
” (T below) and a beep will sound.
3. Raise all adjustable feet to the hole that provides the most ground clearance before
towing the unit.
4. Press ON/OFF to deactivate the display.
5. Close and latch the cover of the touch screen display.
Always check to ensure the unit is properly connected to the tow vehicle be-
fore retracting the tongue jack

Always check to ensure the unit is properly connected to the tow vehicle be-
fore retracting the tongue jack
