Jaycar AR1727, User Manual

Page: 7 / 26

Adding a Device
If you want to operate the second TV (or second VCR, DVB, DVD, CD,
TAPE, TUNER etc.), you can add a new device. Please just operate the steps as
following:
1. Press the SET key on your remote control for more than 3 seconds, then
release it.
2. Press the or keys to select to Device on LCD menu, and press OK key.
3. Press the or keys to select to Add New on the LCD menu, and press the OK
key, the LCD shows SelectDEV, then please press device key to select your
desired adding device (e.g. TV or DVD ...). If you add more than 8 new devices,
the LCD will shows Full.
5
Battery
full Battery half
full Battery
low
Battery Installation
Device Edit
To install the batteries:
1. Turn the remote over, pull up on the tap and lift the cover off.
2. Insert the batteries matching the batteries to the (+) and (-) marks
inside the
3. Slide the battery cover back into the place.
Note:
Whenever the batteries need replacement, the LCD remote will indicate with
battery low message. Please replace them with new batteries now. All settings
you have programmed into the new remote control will be stored in memory
even if you take out the batteries (but you may need to reset the clock).
4. Press OK key to save it and LCD shows Success!.
5. If you add other devices, please repeat steps 3~5. You can press device
key(e.g. TV) again to finish SET UP or use or to select other set-up.
battery case.