Jaycar AR1727, User Manual

Page: 11 / 26

Note:
1. In case that you did not stop the search in time when device reacted,
you may press the or key to turn back to find the passed code.
2.The keys of OK, EXIT are only used to set-up your new remote
control during the Auto Search, you can't control your device for menu
function at the moment until you quit from the set up.
3. When remote control searches through all codes, the remote control
will stop at the beginning code of the search.
4. If the device is locked, you must first unlock the device then set up.
Set-up by Enter Code
1. Switch on the device, which you would like to control (e.g. TV, DVD...).
2. In the back section of this manual, please find the brand name and
code no of your device brand (e.g. Lifetec 003,010,062,).
3. Press the SET key on your new remote control for more than 3
seconds, then release it.
4. Press the or keys to select to SetupCode in LCD menu, and press OK key.
5. Press the or keys to select to EnterCode in LCD menu, and press OK key.
9
TV 048
SUN 11:59
AM
Device
SetupCode
DVD 026
Search
DVD 048
Searching
TV 048
Search
Device
SetupCode
SET 3S OK
OK OK
DVD 045
Search
OK
DVD
DVD 048
Search
OK
1S
Auto Srch
EnterCode
OR
Auto Srch
EnterCode
Success!
OR