Learn a Command
1. Press a device key (e.g. TV) which you want to learn.
2. Press and hold the SET key for more than 3 seconds, then release it.
3. Press the or key to Learning in LCD menu, and then press the
OK key.
4. Press the or key to Learn Key in LCD menu and then press the
OK key LCD shows Select Key, if you exit learning mode ,please
press the device key.
5. Select the target key you wanted to learn (e.g. Power). The LCD
display PLS Send Signal in.
6. Point the transmitter of the original remote control remotes face to the
receiver window of this universal remote control by approximately 50mm apart.
7. Press and hold the original remote key (e.g. Power) until the LCD
display Success! for 1 second. If LCD display Failed, please Repeat
Steps 4-6.
8. Repeat Steps 4-6 to learn some more keys.
9. Press a device key (e.g. TV ) to quit the learn operation when all
desired remote commands are learnt.
11
TV 048
SUN 11:59
AM
Device
SetupCode
PLS Send
Signal in
SelectKey
Press a target key e.g. Power
Press a source key from original remote
To learn next key
TimeSet
Learning
SET 3S
OK
OK
LearnKey
Delete Key
OR
Success!
Summary of Contents for AR1727
Page 26: ......
