F LCD
If you set the Delay to On, that means the LCD screen is always on (It is
convenient to see the status but it is bigger power consumption). If you set up
Delay to Off, the LCD screen will be on for some time and then be off after any
operation on your remote control and you can change the length of on time as
below steps.
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the or key to select the OtherSet on LCD menu, and then press OK key.
3. Press the or key to select the Delay on LCD menu, and then press OK key.
21
TV 048
SUN 11:59
AM
Contrast
08
Device
SetupCode
Contrast
07
Delay
Contrast
TimeSet
OtherSet
SET 3S
OK
Delay
Contrast
OK
Success!
1S
OK
VOL Lock
DEV Lock
OR
OR
OR
E. Contrast Adjust
If you are not satisfied the screen contrast of your remote control, you can use
below steps to change it:
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the or key to select the OtherSet on LCD menu, then press the OK key.
3. Press the or key to select the Contrast on LCD menu, then press the OK key.
4. Press the or key to adjust contrast level, and then press the OK key when you
satisfied the LCD shows Success!.
5. You can press any device key to finish set-up or press the EXIT key to last state,
or you can use or to select other set up.
Summary of Contents for AR1727
Page 26: ......