www.javad.com
11
Getting Started
This chapter will describe how to install and charge
battery, mount micro SD card and start up the control-
ler.
To start up the VICTOR-2:
• Install Micro SD card
• Install SIM card
• Mount Battery
• Connect power source
• Operate power of the VICTOR-2
Installation SIM and micro SD
cards
Ensure that the SIM card is inserted correctly before
using your device for the first time.
Insert the SIM and micro SD card carefully as shown
in the following illustrations. Make sure the micro SD
card terminal position before insert the micro SD card.
Push the back end of the micro SD card to fix it at the
last step.
Warning:
Do not use the power too much when you insert the mi-
cro SD card. The micro SD card may be damaged
Warning:
If you install the micro SD card in the wrong position,
the micro SD card may be damaged or it may cause the malfunc-
tion of the micro SD card Slot.
Warning:
Keep the terminal part of the micro SD card in clean. Be
careful the terminal part of the micro SD card not to dusty
Warning:
As the micro SD card is consumable, the micro SD card
end its days and may be not able to save data if you use it more
than over certain times. In this case, replace micro SD card to buy
a new one.
