10
www.javad.com
Hand Strap Removal and
Replacement
To remove hand strap:
1. Rip the Velcro strap off
2. Take out the Velcro strap from the upper loop
3. Force to pull out lower loop from the VICTOR-2
Battery
CAUTION:
If the Product is wet, do not put it in a device that
may heat the VICTOR-2 (heater, microwave oven, etc.).
CAUTION:
Heating batteries may cause an explosion, defor-
mation or fault. (Water or any other liquid will change the
color of the label inside the VICTOR-2.
You may need to fully charge the battery before using
your VICTOR-2 for the first time. Battery can be charged
using below listed accessories.
Use the mini USB cable to charge the controller. The
charging time is about 4 hours 30 minutes.
Note:
Recharge only with the charger specified by the
manufacturer: mini USB Cable 5V, 3A
