Description and Operation
Base and Rover Setup
Rover Configuration
50
www.javad.com
6. Modem is configured now.
7. Tap
Settings
GNSS.
Ensure there is no specified data for transmitting (All
Transmit Data (Base)
formats should be set to None).
8. Tap
Receive Data (Rover)
UHF
and select the same corrections type which was selected on the
base:
Figure 83. Receive Data
9.
To ensure the rover receives the corrections via UHF, tap on the UHF status icon and check the
LQ
and
Received
parameter. Ensure LQ is 100%, and
Received
value is on the increase.
Figure 84. Status of the radio