Javad TRIUMPH-VS Operator'S Manual Download Page 9 | Manualshive

Page: 9 / 96

background image

Chapter 1

9

www.javad.com

D

ESCRIPTION

AND

O

PERATION

1. Principles of Operation

TRIUMPH -VS is a revolutionary new GNSS complex that combines high performance 216-channel
GNSS receiver, all-frequency GNSS antenna, and a modern featured handheld. All-in one TRIUMPH-VS
is a new word in survey. Compact, lightweight, reliable TRIUMPH-VS changes the idea of surveying,
opens new horizons in this industry.

In the perfect designed compact case (178 mm x 109 mm x 110) there is enough place for the replaceable
battery pack, removable memory card, two built-in cameras, two SIM cards, GSM/GPRS, WiFi, and
UHF antennas, Bluetooth module.

All GNSS, UHF, GSM, Bluetooth®, and WiFi antennas are conveniently hidden and protected. An
external antenna can also be connected to bypass the internal GNSS antenna. There are two SIM cards
inside the box, they can be easily reached and changed.

TRIUMPH-VS can receive and processes multiple signal types

GPS C/A, P1, P2, L2C (L+M), L5 (I+Q);

Galileo E1 (B+C), E5A (I+Q), E5B (I+Q), AltBoc; GLONASS C/A, L2C, P1, P2, L3 (I+Q); QZSS C/A,
L1C(I+Q), L2C (L+M), L5 (I+Q), SAIF; BeiDou B1, B2; SBAS L1, L5

improving the accuracy and

reliability of your survey points and positions, especially under difficult jobsite conditions.

The GNSS component of TRIUMPH-VS receivers means you can access the GPS (Global Positioning
System) satellites of the United States, the Galileo (an upcoming global positioning system maintained
and operated by Galileo Industries), the GLONASS (Global Navigation Satellite System) satellites of the
Russian Federation, the QZSS (is a proposed three-satellite regional time transfer system and Satellite
Based Augmentation System for the Global Positioning System, that would be receivable within Japan),
and the BeiDou (Chinese Global Navigation Satellite System), increasing the number of satellites your
receiver can detect, thus improving the accuracy of your measuring points, increasing productivity, and
reducing cost.

Several other features, including multipath mitigation and common tracking, provide under-canopy and
low signal strength reception. The TRIUMPH -VS receiver provides the functionality, accuracy,
availability, and integrity needed for fast and easy data collection.

«
...
7
8
9
10
11
...
»

Summary of Contents for TRIUMPH-VS

































































































Reviews:

No comments

Related manuals for TRIUMPH-VS

Brand: Uconnect Pages: 123

Brand: u-blox Pages: 2

Brand: Harman Pages: 115

Brand: Yaesu Pages: 24

CQC1121U - AUTO RADIO/CD DECK

Brand: Panasonic Pages: 25

Brand: Intermatic Pages: 56

Brand: Blaupunkt Pages: 43

Brand: Dynascan Pages: 10

Brand: Sangean Pages: 48

Brand: JRC Pages: 44

Brand: Pyle Pages: 14

Brand: Teac Pages: 20

Brand: Caliber Pages: 18

Brand: Boss Audio Systems Pages: 19

Brand: Intek Pages: 28

Brand: Seitron Pages: 6

Brand: Sony Pages: 44

Brand: Sony Pages: 50

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands