background image

www.javad.com

  

5

Technical Assistance

If you have a problem and cannot find the informa-

tion you need in the product documentation, contact 

your local dealer. Alternatively, request technical sup-

port using the JAVAD GNSS World Wide Web site at: 

www.javad.com
To contact JAVAD GNSS Customer Support use the 

QUESTIONS button available on the www.javad.com.

Regulatory Information

The following sections provide information on this 

product’s compliance with government regulations.

FCC Class A Compliance

This device complies with Part 15 of the FCC rules. 

Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, 

including interference that may cause undesired op-

eration.
This equipment has been tested and found to comply 

with the limits for a Class A digital device, pursuant 

to part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful in-

terference when the equipment is operated in a com-

mercial environment. 
This equipment generates, uses, and can radiate ra-

dio frequency energy and, if not installed and used in 

accordance with the instruction manual, may cause 

harmful interference to radio communications. Oper-

ation of this equipment in a residential area is likely 

to cause harmful interference in which case the user 

will be required to correct the interference at his own 

expense.

Canadian Emissions Labeling  

Requirements

This Class А digital apparatus meets all requirements 

of the Canadian Interference-Causing Equipment 

Regulations.
Cet appareil numérique de la classe А respecte toutes 

les exigences du Réglement sur le matériel brouilleur 

du Canada.

Summary of Contents for TRIUMPH-3

























Reviews: