www.javad.com
15
Note:
Parameter
Base
Rover
Implicit Message Output
Period
15 seconds
Elevation mask angle
15 degrees
File name prefix
Enter a unique ID, such as the last 3 digits
of receiver’s serial number. By deafault the
prefix is log
FN key mode
(starts/stops the data recording when FN
button is used)
Select LED blink
mode switch for
Static data
Select Occupation
mode switch (for
RTK)
Initial dynamic mode
-
Select Dynamic (for
trajectory survey)
Click Apply every time after the parameter was changed,
otherwise the receiver won’t save the changes. Click Refresh, to
ensure the changed parameters and new configuration are saved.
Figure 4.
Log Files tab
Figure 5.
TriPad tab
5. Open
Positioning
tab and set the Elevation
mask to 15 degrees .
Figure 6.
Elevation mask
6. To set up the base station, open the
Base
tab and
set the following parameters:
Antenna Phase Center
Position (APC)
- enter latitude, longitude, and alti-
tude (ellipsoidal height) values of the antenna posi-
tion. Do one of the following:
• If known, type in the values.
• Click
Get from receiver
to use the current anten-
na position.
7. Restart your receiver. Open the
Base
tab and
check coordinates. Click
Refresh
, to refresh the pa-
rameters.
Figure 7.
Base tab
7. To set up the rover, open
Positioning
tab and set
the
Position Computation Mode
- this drop-down list
box allows selecting the mode of position computa-
