TRIUMPH-2 START GUIDE
7
site finishing without closing receiver file
(it is may be useful for Stop&Go surveying
but unnecessary for OPUS processing).
To start the Static site surveying or Kine-
matic Trajectory surveying, tap the need-
ed button. The Surveying page will appear,
and you will be able to monitor your sur-
veying progress (Figure 5).
The application will instructs the receiver
to finish the logging automatically if the
Static surveying is selected and occupa-
tion time is set, you can close the app or
disconnect your iPhone/iPad from the
receiver and wait till the recording light
is blinking on the receiver, that means
the data recording is on. Alternatively,
you can connect at any time to the re- ceiver to monitor its status and to cancel
the surveying using the Close File button.
For the Trajectory surveying, you have
to close the recording file by tap-
ping the Close File or pressing the
recording button on the receiver.
Satellites and receiver files
After the connection with the receiver is
established, you can monitor the status of
the satellites. Go to the Satellites tab to see
the Satellites table and SkyPlot. Use the
buttons on the bottom, to switch between
SkyPlot and Satellites (Figure 6).
The Satellites table includes satellite num-
ber (PRN for GPS and FCN for GLONASS),
receiver status (H means Healthy (OK) and
Figure 4. Setup Survey
Figure 5. Surveying
Figure 6. Sttelites and Sky Plot
