TRIUMPH-2 START GUIDE
15
width, and call sign shall be configured in
accordance with your FCC licence
FH modem configuration
Open FH Radio tab and set parameters:
• Specify zone in the Zone drop-down list
(USA, Australia, EU).
• Protocol Type “simtx” for base.
• Hopping algorithm: a number from 0 to 9
in Rule field.
• Forward Error Corrections: on
• Scrambling: 1
• Output power for base: a value in dBm
from 15 to 30 with 1 dB step in Power field
Click Apply to save the settings.
4. To load new configuration to modem
you have to set Modem mode to Off and click Apply.
Then set Modem Mode to auto. Click Apply again.
You will see fast blinking modem’s Bluetooth blue
LED indicating that TRIUMPH-2 is configuring the
modem.
5. To turn on corrections go to Ports 4 Bluetooth and
enable data output for Bluetooth b (port the UHF
modem is connected to): e.g. you can use RTCM 3.x
correction and select “RTK RTCM3 GGD full” (Figure
19). Set Input Mode for Bluetooth b to none.
6. In the field you should set current position of the
base station. Open Base tab (Figure 17):
1. Please select appropriate Antenna type depend-
ing on mounting: for TRIUMPGH-2 receiver with
adapter to mount on pole - JAVTRIUMPH_2A; for
TRIUMPH-2 receiver without adapter to mount on
the monopod - JAVTRIUMPH_2.
Figure 17. NetView&Mo-
dem. Corrections
