5. Click on “Finish” to restart your computer, the new display
driver will be in place after Windows boots-up.
á
Microsoft Windows
®
NT™4.0
The procedure of display driver installation requires setup with
service pack 6 (Microsoft® Windows NT™4.0) first. After your
windows desktop has fully loaded service pack 6, you may
insert the software CD into CD ROM drive and follow the install
steps below:
Upgrade video adapter to an existing system.
(Windows has been pre-loaded)
1. SELECT the “Display” icon in control panel and
then SELECT the “Settings” page.
2. SELECT “Display Type...” button in the “Settings”
page.
3. SELECT “Change...” button from the Adapter
type section.
4. SELECT “Have Disk...” button from the Change
Display page.
20
