Jason International, Inc. •
501.771.4477
Page 13 of 18
Customer Service : 800.255.5766
Copyright © 2011 Jason International.
stAnDARD AnD pREmiER EDitiOn
micROsiLk
tm
-AiRmAssEuR tOuchpAD
OpERAting instRuctiOns
microsilk On/Off icon
The MicroSilk icon is used to activate the MicroSilk pump
and the 20-minute timer.
Pressing the icon the first time starts the pump.
•
Pressing the icon again will shut the pump off.
•
blower On/Off and modes icon
The Blower icon is used to activate the blower and the
20-minute timer.
Pressing the icon the first time starts the blower in the
•
constant high speed mode.
Pressing the icon again begins the wave mode, indicated
•
by a slow flashing light.
Pressing the icon a third time will change the blower to
•
pulse mode. This is indicated by a rapid light flash.
blower speeds icon
The Blower Speeds icon is used to increase or de-
crease the blower speed once the blower is On.
Press and hold the icon to decrease the blower speed
•
until the desired intensity is reached, then release.
Press and hold the icon again to increase the
•
blower speed until the desired intensity is reached.
The blower will return to its highest speed on any mode
change.
LED Light icon
The LED Light icon is used to operate an LED light (if
installed)
Press the icon for less than two (2) seconds to turn the
•
lights Off or On.
Hold the icon for more than two (2) seconds to change
•
modes.
This function has a two (2) hour timer and remembers the
last mode.
Figure 13
blower On/Off, modes
microsilk On/Off
blower speeds
LED Light
The Jason Standard and Premier Edition MicroSilk-
AirMasseur touchpad is used to access all of the functions
of the MicroSilk and blower controls.
NOTe:
It is not recommended to operate the MicroSilk
system at the same time as the AirMasseur system as this
could diminish the effects of the MicroSilk system.
