OPERATOR’S MANUAL
·
MIG/MAG PULSE SERIES
- 12 -
Figure 5.6:
Welding process parameters selecting zone
1.Pre-flow time; 2. Initial parameters (speed, current and voltage); 3. Upslope time; 4. Peak
parameters (time, current, speed, thickness, arc characteristic, voltage, percentage and
frequency); 5.Base parameters (current, speed and voltage); 6. Downslope time; 7. Crater filling
parameters (current, speed and voltage); 8. Post-flow time
It contains components such as process parameters LED and right selecting key. Process parameters
include preposed parameters (such as pre-flow time), initial parameters (such as speed, current
and voltage), upslope parameters (such as time and pitch ratio), peak parameters (such as time,
current, speed, thickness, arc characteristic, voltage, proportion and frequency), base
parameters (such as current, speed and voltage), downslope parameters (such as time and pitch
ratio), crater parameters (current, speed and voltage) and postposed parameters (such as post-flow
time). Users can select the desired process parameters by pressing the right selecting key, and
the corresponding LED will be on when a certain segment is selected. There are some parameters
(1
~
8) in some segments, while no parameters in other segments. Only segments with one or more
parameters can be selected, and those segments without parameters cannot be selected. To select
the parameters to be ultimately displayed or adjusted, users need to make a second choice through
the current column or voltage column.
Summary of Contents for MIG 350P
Page 2: ......
Page 29: ...OPERATOR S MANUAL MIG MAG PULSE SERIES 27 APPENDIX...
