Jasic EVOLVE200 PLUS, User Manual

Page: 40 / 62

EVOLVE200 PLUS USER MANUAL
38
Select the 2T/4T by the KNOB1 and confirm by pushing KNOB1.
It is possible to select 2 Time, 4 Time, SPOT Special with timer.
2.8.6.3 MIG twice Hot start setting
Press/touch the HOT START button to enter in the HOT START menu.
Select the HOT START On/Off by the KNOB1 and confirm by pushing
KNOB1.
Note:
If the hot start value exceeds the maximum output of the
machine, the machine limits automatically it at 240-250A.
2.8.6.4 MIG twice material setting
Press/touch the Material button to enter in the material
selection menu. Select the material by KNOB1 and confirm by
pushing the KNOB1.
2.8.6.5 MIG twice wire diameter setting
Press/touch the Wire size button to select and enter in the
diameter selection menu. Select the diameter by KNOB1 and
confirm by pushing the KNOB1.
2.8.6.6 MIG twice gas setting
Press/touch the Gas button to select and enter in the gas
selection menu. Select the gas by KNOB1 and confirm by
pushing the KNOB1.