Jasic EVOLVE200 PLUS, User Manual

Page: 48 / 62

EVOLVE200 PLUS USER MANUAL
46
orange bar graph and digital mode over the digits in white color (note that the analog control can be also the
foot control without the switch connected).
2) Any type of analog torch (as TER configuration),the cycle can be chosen between 2T, 4T and Spot,the
current set is adjustable by panel knob and orange bar graph indicates the graphic level the current set can
be adjustable also by the push buttons of the analog torch in parallel to the knob of the front panel the
adjustment from the torch can be used also in welding mode when the torch cycle is set at 4T external
analog control with 5Kohm potentiometer connected to the CAD connector can modulate the welding current,
the current bar graph change into double indication with two colors, the yellow bar graph indicates the
maximum set current and its digital values is reported only during the adjustment by the front panel knob with
digits that change color into yellow the adjustment from the connected analog control is shown with a orange
bar graph and digital mode over the digits in white color (note that the analog control can be also the foot
control without the switch connected).
3) Evolve Smart torch connected to the two pole torch switch the Cycle can be chosen between 2T, 4T and
Spot also from the torch the current set is adjustable by panel knob and orange bar graph indicates the
graphic level, the same adjustment can be done also from the smart control of the torch external analog
control with 5Kohm potentiometer connected to the CAD connector can modulate the welding current, the
current bar graph change into double indication with two colors, the yellow bar graph indicates the maximum
set current level and its digital values is reported only during the adjustment by the front panel knob with
digits that change color into yellow the adjustment from the smart torch is for maximum set (as for the knob),
can be checked in the smart module as value, but in the front display only the yellow bar graph indicates the
changes, the digits show in white color the set from remote control. the adjustment from the connected
analog control is shown with a orange bar graph and digital over the digits in white color (note that the
analog control can be also the foot control without the switch connected).
4) The foot control (5Kohm) with internal switch and any kind of torch connected (evolve included)
automatically the cycle is only 2T,the front panel knob adjust the maximum current,the bar graph is double
yellow show the maximum (adjustable by frontal knob) and orange the actual set from foot control the yellow
bar graph indicates the maximum set current and its digital values is reported only during the adjustment by
the front panel knob with digits that change color into yellow the adjustment from the foot control control is
shown with a orange bar graph and digital mode over the digits in white color.