Jasic EVOLVE200 PLUS, User Manual

Page: 21 / 62

EVOLVE200 PLUS USER MANUAL
19
2.6.3 MMA manual mode setting
2.6.3.1 MMA welding display
MMA welding display is as follows:
In this case, there was a set current of 100 A with the VRD
set in On position, and the system set a manual for the
Rutile with 1,6 mm electrodes.
2.6.3.2 Parameters setting
Push the Materials button to select the type of work to be
performed in the electrode adjustment.
Select the material by rotating the KNOB1 and confirm by
pushing KNOB1.
The selections available are RUTIL, SST, BASIC,
CELLULOSIC.
SETTING IN MANUAL ELECTRODE
Rotate KBOB1 to adjust the output current from Mini set to
Max set.
Rotate KNOB2 to adjust the arc force %.
Advanced Settings
Push the EXTRA button to enter in the a dvanced setting
menu.
SELECT the sub menu by knob1 and confirm by pushing
the knob1.
- VRD Switch
- Power Limit On/Off
- Power Limit (if Power Limit On)
- Anti-sticking.