Jasic EVOLVE200 PLUS, User Manual

Page: 27 / 62

EVOLVE200 PLUS USER MANUAL
25
2.7.3 SETTING TIG PULSE
2.7.3.1 Electrode adjustments
To select the TYPE of TIG MODE, push the MODE button.
Select the TIG TYPE by rotating KNOB1 and confirm by
pushing the KNOB1.
Press the Material button to enter in the material selection
menu. Select the material by KNOB1 and confirm by pushing
the KNOB1.
It is possible to select: materials listed in the display (FE,
CRNI,TITAN).
In FE/CRNI/TITAN , the parameter will be adapted to the
material and tungsten diameter selected.
Press the Diameter button to enter in the tungsten diameter
selection menu. Select the diameter by KNOB1 and confirm by
pushing the KNOB1.
2.7.3.2 2T/4T Setting
Push the 2T/4T button to enter in the 2T/4T menu.
Select the 2T/4T by KNOB1 and confirm by pushing the
KNOB1.
It is possible to select 2 Time, 4 Time, SP (SPOT).