JAROLIFT ROLLO, Original Instructions Manual

Page: 4 / 37

4
SAFETY ADVICE
It is important for personal safety that these instructions are
followed. Failure to observe these instructions could result in
material damage or personal injury during the use of this pro-
duct. The manufacturer bears no responsibility for material
damage or personal injury caused by failure to observe these
instructions.
Take note of the following points before commencing
assembly:
■
Warning notes are marked with this symbol
in the instructions.
■
Please take note of the product‘s warning
notices and conditions of use.
■
Please read all instructions carefully before
assembly.
■
For your own safety, follow all safety
instructions and settings notes.
The present assembly instructions belong to this product and
contain important notes to the assembly and the use of the
product. It describes the assembly of the Jarolift®™ roller fly
screen for windows. Forms or special solutions which diver-
ges are not considered.
Correct use / conditions of use
The Jarolift ® ™ roller fly screen for windows is an outdoor fly
screen which can be used only for the intended use. Addi-
tional loading of the Jarolift®™ roller fly screen for windows
by means of suspended objects or cables can lead to the da-
mage of the product, and is therefore not allowed. Following
the present instructions and the observance of the montage
conditions belong to the intended use. Use only original
components and original accessories of the manufacturer.
■
ATTENTION! When working on windows or doors,
be sure to be protected against falls. Do not let any
tool fall from the window!
■
ATTENTION!
Do not fall out of the window during
assembly work. Take precautions as the situation
requires. Do not let tools fall out of the window.
■
ATTENTION! To avoid injuries and damages, please
note that when tensioning the spring, it is under a
very high tension!
■
ATTENTION! Prevent children from leaning against
the fly screen when the window is open. Other-
wise, there is the danger of falling.
■
ATTENTION!
Make sure at regular intervals that
the fly screen is still correctly fastened, that it has
lost no mounting parts and that it is safe from
falling down from the window by wind pressure or
suction.
■
ATTENTION! Do not cut yourself! There is the risk
of injury while using sharp tools!
ATTENTION!
The tension of the spring is already factory-set. Additional adjustment of the spring is not
necessary.
Maximum additional tension = 5 turns. The spring breaks if overloaded.
In order to avoid injuries and damage, please note that the spring is under an extremely high tension!