Japan Radio Co. JLN-740A, Instruction Manual

Page: 80 / 232

Chapter 4 Setting by Using Menus (JLN-740A/741A) 4-10
4.1.3.4. Confirming the system information
The information relating to this equipment such as software version can be displayed.
Before making an enquiry on this equipment, check the information of this equipment in the [ABOUT]
menu.
1
Touch the [ABOUT] button in the main menu.
Information on the equipment is displayed.
JLN-740A JLN-741A
2
Close the [ABOUT] menu by touching the
button.
Information that is displayed in the [ABOUT] menu.
The following information is displayed in the [ABOUT] menu.
Information Description
Display ver. :
Software version of main display.
Latest software version at the time of print: V1.002
DP Proc ver. :
Software version of distributed processor.
Latest software version at the time of print: R01.01
SP Ctrl ver. :
Software version of signal processor controller
Latest software version at the time of print: R01.00
SP Calc ver. :
Software version of signal processor calculator
Latest software version at the time of print: R01.00
SP FPGA ver. :
Software version of signal processor FPGA
Latest software version at the time of print: R01.00
Display ser.:
Main display serial number. (Note: now displaying
only “0000000” )
DP ser.: Serial number of the distribution processor.
SP ser.: Serial number of the signal processor.
Transducer ser. :
Transducer serial number
(Note: An arbitrary serial number of the transducer
must be set at installation.)