Japan Radio Co. JLN-740A, Instruction Manual

Page: 109 / 232

6-11 Chapter 6 Setting by Using Menus (JLN-740N/741N)
6
6.1.3.1.4.3. STEP3 Selecting display contents
Select as many display contents as the number of screens that are created by segmentation.
For instance, for a 2-segmentation screen, select the display content for one half of the screen and then
select the display content for the other half of the screen (see the diagram below).
First select Doppler on the customised screen, and, next, select the display contents.
Only the integer section or a decimal section of some item that is selected on a 1-segmentation
customised screen or a special screen can be expanded.
If display content selection is set to “OFF”, no information is displayed in the area.
Set the auto screen function and display mode in STEP3. The following functions can be set.
1-1) AUTO SCREEN:
ON – Enables the auto screen function.
OFF – Disables the auto screen function.
1-2) SOUND: SOUND 1 – Emits a sounder “pip pip” when the screen is switched.
SOUND 2 – Emits a sounder “pip” when the screen is switched.
OFF – Does not emit a sounder even if the screen is switched.
1-3) TIME: Set a screen switching time. A time of up to 10 seconds can be set.
2-1) DISPLAY MODE: Normal: Displays in the character of the same size.
Special 1: Only integer part is expanded and displayed.
Special 2: Only a decimal part is expanded and displayed.
Auto range: Integer part or a decimal part is expanded for the optimum
display.
Example) Procedure for selecting display contents for a 2-segmentation screen

: Select display
contents of the
1/2 screen

Select display
contents of the
2/2 screen.

: Select a
DOPPLER of
the 1/2 screen

: Select a
DOPPLER of
the 2/2 screen.
Select
STW
TRIP
ODO
Select
STW
TRIP
ODO
Screen structure