Japan Radio Co. JLN-740A Instruction Manual Download Page 101

Page: 101 / 232

6-3

Chapter 6 Setting by Using Menus (JLN-740N/741N)

The main menu is displayed.

Main Display NWZ-4640

The functions of the main menus of the display unit are as follows.

Function

1 DISPLAY

Specifies the settings for LCD, click sound, screen selection, and back
light color.

2 SYSTEM

Changes system settings.
System settings can be changed in maintenance mode only.

3 LANG.

Selects one of the two display languages (English/Japanese).

4 ALERT

Specifies the settings for alerts.

5 SENSOR

Specifies the settings for a sensor.
Sensor setting can be changed in maintenance mode only.
This menu is not discussed in this instruction manual.

6 DATE - TIME

Sets date and time. (JLN-740N only)

7 ALERT HISTORY

Displays the history of alerts that occurred.

8 ALERT LIST

Displays a list of alerts that are currently occurring.

When you need to turn off the power, do it after 10 seconds elapse after setting. Otherwise, the
set values may not be saved.

Supplement

Summary of Contents for JLN-740A









































































































































































































































Search results

Summary of Contents for JLN-740A

Reviews:

Brands by name

Popular brands

Japan Radio Co. JLN-740A, Instruction Manual

Search results

Summary of Contents for JLN-740A

Reviews:

Brands by name

Popular brands