Japan Radio Co. JLN-740A, Instruction Manual

Page: 192 / 232

Appendix A Menu list A-10
A.3 Maintenance software menu list

JLN-740A, JLN-740N
Set value of the underline is the value of the factory.
Menu item Item name Setting name Setting value
User settings
Description
Current Change
First Settings
VD4 Start Measure Measure Stopped, Started Start of transmission
VD6 Speed Calculation
Configuration
Speed Correlation -50.0 to 0.0 to 50.0 Correction of ship speed
VD10 Distance Reset Total Distance 0 to 0.0 to 999999.99 Setting of total distance
VD12 Vessel Size
Information
Configuration
X:-999.9 to
999.9[m]
-999.9 to 0.0 to 999.9
Transducer installation position
(port/starboard)
* JLN-750 only
Y:0.0 to 999.9[m] 0.0 to 999.9
Transducer installation position
(bow/stern)
* JLN-750 only
Y:0.0 to 999.9[m] 0.0 to 999.9
Vessel’s heading speed position
* JLN-750 only
Y:0.0 to 999.9[m] 0.0 to 999.9
Stern speed position
* JLN-750 only
VD14 Depth
Configuration
Draft [m] -100.0 to 0.0 to +100.0 Draft
VD18 System Test
Status
TEST 18kn
Enabled : Red
Disabled : Green
System test (18kn test)
LOST SPEED
Enabled : Red
Disabled : Green
System test (lose speed alert)
Main Display HW
ERROR
Enabled : Red
Disabled : Green
System test (Main Display hardware
error)
Distribution
Processor HW
ERROR
Enabled : Red
Disabled : Green
System test (distribution processor
hardware error)
Signal Processor
HW ERROR
Enabled : Red
Disabled : Green
System test (signal processor hardware
error)
VD26 System Time
Configuration
System
Time(Year)
2000-2037
2000 to 2016 to 2037 System Time (Year)
System
Time(Month)
1 to 12 System Time (Month)
System
Time(Day)
1 to 31 System Time (Day)
System
Time(Hour)
0 to 23 System Time (hour)
System
Time(Minute)
0 to 59 System Time (minute)
System
Time(Second)
0 to 59 System Time (second)
VD35 Transducer
Mounting(NKF-547)
Information
Model Name Up to 9 ASCII characters Model name (NKF-547/531E)
Serial Number Up to 10 ASCII characters Serial number (NKF-547/531E)
Barcode Number Up to 13 ASCII characters Bar code number (NKF-547/531E)
VD36 Signal
Processor(NJC-70S/D)
Errors
No Bubble
Reference
Normal :
Green
Abnormal :
Red
Displayed
only
Bubble detection reference abnormality
VD38 Remote Display
Configuration
Remote
Display(1) Type
NWZ-4610,NWZ-650SDR/
840SDR
Select Remote display(1)
Remote
Display(2) Type
NWZ-4610,NWZ-650SDR/
840SDR
Select Remote display(2)
VD39 Analog
Display(NWW-24/25/2
6) Configuration
Analog Full Scale 20 to 30 to 40 Analog full scale
VD44 LOG Pulse
Configuration
LOG Pulse Type 100,200,400 LOG pulse type
VD48 Brightness
Control Configuration
Dimming
Controller
Not Use,Dimmer
Unit(NCM-227),Main
Display,Serial
Dimmer(DDC),Serial
ROT(DDC),Serial
GPS(DDC), Serial
Spare(DDC),Ethernet(DDC)
Brightness control mode
VD85 Serial Alert
Configuration
Alert On Serial
Use
ALF/ACN/ALC/ARC/HBT,
Use ALR/ACK
Serial alert type
“Rectified-unackn
owledged” State
Not Use,Use
“Rectified-unacknowledged
”
Whether “Rectified – Unacknowledged”
state is used by ALR or not