18
USER INSTRUCTIONS MASTER MOBIL II (111 801 000) 2018-01
4 SETUP
4.2
Handle angle
The guide handle is adjustable in six positions
and can be individually adjusted to the desired
working position,
Pull out the mains plug!
Hold both clamping levers
Unscrew the left clamping lever and remove the
complete handle bolt (A).
Attention handle is not fixed !!
support with your body or by a second person
Set the handle to the desired position, push in the
handle bolt (B) and tighten the clamping lever again.
4.3
Weights
4.4
Operating
lever
For easier transport, the weights
should be removed.
To remove the rear weight, remove two
bolts with the wrench on both sides (A)
and remove the weight by the handle (B)
To remove the front weight, loosen the
two front bolts (C) with the wrench and
remove the weight by the handle.
ATTENTION Weights are heavy
caution when removing and mounting.
To carry, put handle backwards
see chapter 3.1
ATTENTION ! Never lift the complete machine by the weights.
The handles on the weights are only for removing and transporting the weights
themselves.
The angle of the operating lever can be
infinitely adjusted to the desired working
position.
Release lever clamp with ring spanner,
adjust and tighten again.
Levers must be set to the same position
on both sides.
Working positions
(A)
(B)
(A)
(B)
(C)
(D)
Transport position
Summary of Contents for MASTER MOBIL II
Page 2: ......
