AAASewing.com
7
Removing or Inserting the Bobbin Case
Open the hook cover.
Raise the needle by turning the handwheel toward you.
Take out the bobbin case by holding the latch.
When inserting the bobbin case, place the horn into the
recess of the hook race.
Hook cover
Latch
Horn
1
2
3
3
2
1
Setting Spool Pins
The spool pins are used for holding the spool of thread
in order to feed thread to the machine.
To use, pull up the spool pin. Push down for storage.
1
2
3
Upper thread
Hole
Tangle
NOTE:
When using thread which has tendency to
tangle around spool pin, thread through the
hole of spool pin as shown.
The hole should face the thread spool.
1
1
2
3
Janome US2014 Instruction Manual
www.aaasewing.com
US2014 Owners Manual/ User Guide
