www.Janome.com
Installation Instructions | 17
7. Once again verify that the Y-axis gear
engages the blue Flexirack for the Y-axis.
• Do this by looking from the back of
the machine between the bottom
of the quilting machine and the top
of the carriage. If necessary, use the
manual engagement/disengagement
tool to move the gears so they
engage.
• If horizontal adjustment is needed
to ensure that at least half the
white gear and blue Flexirack are
interlocking, loosen the two screws
that mount the y-axis bracket to the
base plates and push the bracket in
the direction necessary while re-
tightening the screws.
• Both screws can be adjusted with
the quilting machine on the carriage.
Pull the machine to the front to
access the front screw and to the
rear to access the rear screw.
• Pull the quilting machine to the rear
of the carriage and ensure the rear
of the Y-axis bracket does not collide
with the black plastic track retainer
on the rear of the carriage. Adjust
the Y-bracket if needed.
Â
IMPORTANT
: If necessary, use the
manual engagement/disengagement
tool to move the gears so they
engage. Insert the end of the tool
into the hole at the front of the
carriage.
