16 | Installation Instructions
www.Janome.com
5. The black cables attached to the Pro-
Stitcher carriage should be routed up
between the rear handles and the
quilting machine, toward the right-
hand side of the machine (looking at
the machine from the back). Attach the
cable clips (
see Parts List, item J) and
route the cable accordingly.
6. The small black cable with the black
3-connector clip should be routed
underneath the P-Pod and snapped into
the quilting machine’s Y-encoder.
The two black cables that run from the
carriage up to the computer should be
clipped into the cable clip under the rear
handlebar to help prevent these cables
from getting caught on the edges of the
carriage.
