12 | Installation Instructions
www.Janome.com
Installation
These instructions are for installing Pro-Stitcher on the Quilt Maker Pro. We recommend installation by an
authorized Pro-Stitcher Retailer if available.
Tools required
• Power drill
• 4mm Allen wrench
• 5mm Allen wrench
• Slotted screwdriver (one large and one small)
• Phillips screwdriver (one large and one small)
• Manual engagement/disengagement tool (
see Parts List, item O)
Installation of the X-Rack and Y-Rack
To install the X-Rack
1. Remove the blue Flexirack (see Parts List, item A) and
the Pro-Stitcher carriage (see Parts List, item E) from
the box.
2. Place the Pro-Stitcher carriage on the frame. Starting
at one end of the table, begin mounting the blue
Flexirack to the front of the table while aligning it to
the front white gear on the carriage.
Peel back a few inches of the pink protective layer
of the tape. Position the blue Flexirack by aligning it
to the white gear as you move down the table. Press
down on the blue Flexirack to stick it firmly to the
table.
