Janome Memory Craft 6700P, Instruction Book

Page: 92 / 112

90
Use a blank space if you want to insert a space between
stitch patterns (Mode 2: pattern 201).
t
Blank space
t
Uniform Stitch Adjustment
The stitch width and length of the programmed patterns
can be uniformly adjusted.
Example 1: Adjusting the stitch width of the programmed
pattern 151 in mode 2 and its mirror image
Shift the cursor to the right of the last programmed
pattern.
Turn the stitch width adjusting dial to adjust the stitch
width.
NOTE:
Stitch length can be uniformly adjusted if the
programmed patterns in the same category
(satin stitches or stretch stitches, etc.) have been
programmed.
The stitch width of the programmed patterns will be
adjusted uniformly.
q
Original width
w
Uniformly adjusted width
Needle drop position of programmed patterns
The needle drop position of the programmed patterns will
vary depending on the pattern combination:
(A) Unified to the left when combining the patterns with
the left needle position and the center needle
position.
(B) Unified to the right when combining the patterns with
the center needle position and the right needle
position.
(C) Unified to the center when combining the patterns
with the left needle position and the right needle
position.
(D) Unified to the center when combining the patterns
with the left, center and right needle positions.
q w
(A) (B) (C) (D)