Janome Memory Craft 6700P, Instruction Book

Page: 31 / 112

29
LCD screen
When the power switch is turned on, the direct pattern
selection (mode 1) is set automatically.
On the LCD screen, the mode number and the following
information are displayed:
q
Selected mode or type of attached needle plate
w
Recommended foot
e
Recommended thread tension
r
Recommended foot pressure
t
Feed dog position
y
Stitch pattern number
u
Pattern image
i
Stitch width (or needle drop position)
o
Stitch length
!0
Direct pattern reference window
Selecting the Sewing Mode
w
e
r
t
!0
i o
q y u
Mode selection
Press the mode key to change the mode.
The following 3 sewing modes are available:
!1
Mode key
Mode 1 (Direct pattern selection mode):
The 10 most commonly used stitches can be selected
directly. You can also register your favorite stitch pattern
to the direct pattern selection (refer to page 31).
Mode 2 (Utility and decorative stitch patterns):
The utility, buttonhole, specialty, decorative stitches and
patterns for patchwork quilting are available.
Mode 3 (Monogram):
You can program letters and special characters for
monogramming.
NOTE:
When the straight stitch needle plate or the
professional grade plate is attached to the machine,
the reference chart suitable for the straight stitch
needle plate or the professional grade plate will be
displayed on the LCD screen. Refer to the pages 41
and 42.
i o
Mode 1
Mode 2, 3
!1