Janome Memory Craft 6700P, Instruction Book

Page: 103 / 112

101
Warning Sign Cause Try this
The twin needle key is pressed when a pattern unsuitable
for twin needle sewing has been selected. Select the pattern suitable
for twin needle sewing.
The twin needle has to be replaced with a single needle. Replace the twin needle with
a single needle, then press
the twin needle key.
The machine is started without lowering the feed dog with
basting or button sewing selected.
Lower the feed dog.
The machine is started with the feed dog lowered. Raise the feed dog.
The needle plate is removed. Attach the needle plate.
Check if the needle plated is
attached properly.
The machine is halting due to the overload. Wait for at least 15 seconds to
restart.
Remove tangled threads
around take-up lever, hook
race and automatic thread
cutting mechanism.
Check also if the needle is
bent or the fabric is too thick.