2
MC200E
Replacing External Parts (2) Bed Cover
Replacing the bed cover
To remove:
1. Turn the power switch on to move the carriage to
the stored position, then turn the power awitch
off.
2. Remove the setscrew (B) and remove the needle
plate.
NOTE:
Place a 100 mm thick block on the back of the
machine when laying the machine on the back to
prevent the carriage from damage
3. Remove the 6 setscrews (A) and remove the
bottom plate.
4. Remove the bed cover while pushing the rear
cover to unlock the hooks.
To attach:
5. Follow the above procedure in reverse.
Setscrews (A)
Bottom plate
Needle plate
Setscrew (A)
Setscrews (A)
Setscrew (A)
Setscrew (B)
Bed cover
Hook
Hook
Rear cover
Summary of Contents for MC230E
Page 1: ...MC230E...
