Janome HORIZON Memory Craft 9480 QC PROFESSIONAL, Instruction Book

Page: 134 / 164

132
Variable ZZ
This unique feature allows you to control zigzag width
with the knee lifter.
Select (1)-M or (1)-L, using darning foot PD-H for sewing
quilt layers. Drop the feed dogs (refer to page 34). Guide
the fabric with your hands while sewing.
Select (2)-M or (2)-L, using clear view free quilt foot QV
or variable zigzag foot QZ (refer to page 121 for how to
attach the foot: same as button sewing foot T) for sewing
flat and firm fabrics. Drop the feed dogs (refer to page
34). Guide the fabric with your hands while sewing.
The A.S.R. key can be used when selecting (2)-M or (2)-L
(refer to page 128).
Select (3)-M or (3)-L, using the satin stitch foot F for
sewing variable zigzag stitches.
The fabric is fed by the feed dogs and the stitch width
can be varied with the knee lifter.
Attach a stabilizer to the wrong side of the fabric if
needed.
Sew at slow to medium speed while guiding the fabric
with your hands and controlling the stitch width with your
knee.
(4)
Maximum Zigzag Width Adjustment
The maximum zigzag width can be limited to suit your
sewing needs.
Press the “+” or “–” key beside the maximum zigzag
width setting to limit the maximum zigzag width to your
preference.
For the variable zigzag stitches with “Free motion 3”,
“Free motion 4”, “Zigzag Stitch 1” and “Zigzag Stitch 2”,
press the setting bar to open the maximum zigzag width
setting.
(4) Maximum zigzag width setting
(5) Setting bar
NOTE:
• When the machine stops, you can raise and lower
the presser foot with the knee lifter.
• The purple tip needle is recommended to prevent
skipped stitches.
(1)-L
(2)-L
(1)-M (2)-M
(3)-M (3)-L
(5)
(4)