Janome HORIZON Memory Craft 9480 QC PROFESSIONAL, Instruction Book

Page: 19 / 164

17
(1)
(2)
(5)
(1) Home key
Press this key to return the top of the utility stitch pattern
selections.
(2) Stitch reference key (refer to page 20)
Press this key to show the stitch reference chart.
(3) Open file key (refer to pages 82 and 103)
Press this key and the open file window will open.
You can open pattern combinations and monograms
saved in the machine’s internal memory or on a USB
flash drive.
(4) Set mode key (refer to page 139)
Press this key to enter the setting mode. You can
customize the machine settings to your preference.
The settings for “Machine Settings”, “Sewing Settings”,
and “Language Setting” are available in this mode.
(5) Lockout key
Press this key to lockout the machine when threading the
machine, replacing the accessories, etc.
To reduce the risk of injury, all the buttons except the
lockout key and presser foot lifter button are deactivated.
To unlock the machine, press this key again.
(6) Touch bar
Press on the bar and slide to the right or left to display
the next page or previous page.
(7) Page keys
Press the page key to display the next page or previous
page. Press and hold the page key to turn the pages
continuously.
(8) Stitch length adjusting dial (refer to pages 52, 61,
etc.)
Turn this jog dial to alter the stitch length of the selected
pattern.
(9) Stitch width adjusting dial (refer to pages 51, 54,
61, 69, 123, etc.)
Turn this jog dial to alter the stitch width or needle drop
position of the selected stitch pattern.
Touch Panel Keys and Jog Dials
CAUTION:
Do not press the touch panel or visual touch screen
with hard or sharp objects like pencils or screwdrivers.
Use the touch panel stylus included in the standard
accessories.
(3)
(4)
(7)
(6)
(8) (9)