Janome HD1800, Instruction Book

Page: 26 / 48

22
Tape the button over the placement mark.
A pin can be placed on top of the foot to from a
shank.
Before lowering the foot, test the needle swing
making sure the needle drops in each hole.
Adjust the stitch width if necessary.
Lower the foot.
Align the both holes of button with the needle
swing, lower the foot and depress the foot
control.
To strengthen the shank, cut the threads leaving
a 20 cm (8˝) tail.
Bring the needle thread down through the hole
in the button and wind it around the shank.
Draw the thread to the wrong side of fabric and
knot.
* When button sewing is finished, return the
drop feed lever.
w q
t
r
q
Pattern selector: 9
w
Presser foot: Transparent buttonhole foot B
e
Thread tension: 3–7
r
Stitch width: 3–3.5
t
Feed dog: Lowered
Sewing Buttons
e
4
6
5