Janome HD1800, Instruction Book

Page: 27 / 48

23
b
* The size of buttonhole is automatically set by
placing the button in the automatic buttonhole
foot R.
* The button holder of the foot takes a button
size up to 2.5 cm (1˝) in diameter.
* Make a test buttonhole on a sample duplicating
the fabric, interfacing and seams of the actual
garment.
* Place the button on the fabric sample and
mark the top and bottom to determine the
position of buttonhole.
* Use the interfacing on the stretch fabrics.
z
Turn the handwheel toward you to raise the
needle to its highest position.
Raise the presser foot lifter.
x
Set the pattern indicator at “BH” by turning
the pattern selector dial.
c
Attach the automatic buttonhole foot R.
v
Pull the button holder to the back, and place
the button in it.
Push back the button holder toward you as
far as it will go.
z x c
b
Pull the buttonhole lever downward as far as
it will go.
v
w q
r t
q
Pattern selector: BH
w
Presser foot: Automatic buttonhole foot R
e
Thread tension: 1–5
r
Stitch length: 0.5–1
t
Stitch width: 4–6.5
Automatic Buttonhole
e
2
4
3