Janome HD1800, Instruction Book

Page: 20 / 48

16
Pattern Selector Dial
Select the pattern by turning the pattern selector
dial and the red signal shows the selected
pattern.
q
Pattern selector dial
w
Red signal
* Raise the needle above the fabrics and
presser foot when you turn the pattern selector
dial.
Suitable width, stitch length and foot are shown
in the guide message window.
e
Guide message window
Zigzag Width Dial
Higher the number, wider the stitch width.
This machine will sew the maximum 6.5mm (1/4˝)
wide zigzag.
The mark shows the adjustment range when
using the twin needle. The red zone is the
appropriate adjustment range for buttonhole
sewing.
NOTE:
Raise the needle above the fabrics when you
set the stitch width.
Stitch Length Dial
The higher the number, the longer the stitch
length.
You can select the suitable stitch length for
fabrics that you plan to sew.
Variable Needle Position
When pattern number 10 is selected, you can
move the needle between center and left needle
positions.
NOTE:
Stitch length is automatically set for stretch
stitch pattern on pattern number 14 to 18.
0 6.5
1 2 3 4 5 6.5
q
w
e