28
X
Adjustment of Needle Threader Plate
If the hook of the threader plate is damaged, change or adjust the part as follows:
To remove:
1. Remove the presser foot holder and needle.
2. Pull the needle threadear plate down to remove it ............ (Fig. 1)
3. Attach the new threader plate supporter so that the pin fits into the notch.
To adjust:
1. If the hook on the threader plate touches the left or right side of the needle eye, loosen setscrew (A)
and adjust the hook position. .........(Fig. 2)
2. If the hook on the threader plate touches the top or bottom edge of the needle eye, remove the face
plate, loosen setscrew (A) and adjust the position of the threader position set plate as follows. …….
(Fig.3)
• If the hook on the threader plate touches the top edge of the needle eye, loosen setscrew (B) and lower
the threader position set plate.
• If the hook on the threader plate touches the bottom edge of the needle eye, loosen setscrew (B) and
raise the threader position set plate.
Hook
Needle eye
Nut
Threader
plate
Setscrew (A)
Setscrew (B)
Pin
Threader plate suppoter
Threader position
set plate
Needle
threader
Fig. 1
Fig. 2
Fig. 3
View X
Notch
