24
Replacing the Circuit Board F, F2, L1, L2
and Speed Control Slider
To remove:
1. Remove the front cover.
2. Pull out connectors from the circuit board A.
3. Remove the setscrews (A) (2pcs.) and the circuit board F.
Remove the setscrews (B) (2pcs.) and the circuit board F2.
Remove the CS rings 3 (2pcs.) and the speed control slider.
Remove the transparent covers (2 pcs.) by pulling them downward and remove the circuit board L1
and the circuit board L2.
Note:
Do not disconnect the connectors by pulling on cord.
To disconnect, grasp the connector, not the cord.
To attach:
1. Follow the above procedures in reverse.
Setscrews (A)
Setscrews (B)
CS ring 3
Circuit board F
Circuit board F2
Speed control slider
Connectors
Circuit board L1
Circuit board L2
Transparent
cover
Transparent
cover
