13
The highest position of the feed dog should be between 0.80 and 0.90 mm from the surface of the needle
plate.
1. Remove the free-arm cover.
2. Lower the presser foot and turn the power switch on.
3. Turn the handwheel toward you to set the feed dog at the highest position.
4. Loosen the setscrew (A) and nut.
5. Adjust the feed dog height by turning the adjusting screw. The highest position of the feed dog should
be between 0.80 and 0.90 from the surface of the needle plate.
6. Tighten the nut and setscrew (A) .
7. Attach the free-arm cover.
Feed Dog Height
Presser foot
0.80 – 0.90mm
Feed dog
Surface of the needle plate
Higher
Lower
Adjusting screw
Nut
Setscrew (A)
Setscrew (A)
