56
1 cm (3/8˝)
t
o
i
!0
!1
!2
x
c
!3
v
b n
m
2 Set the stitch length back to “2.2” and thread
tension to "A".
Attach zipper foot E with the pin on the right-hand
side.
Sew through the fold and zipper tape guiding the
zipper teeth along the edge of the foot.
3 Stop sewing 5 cm (2") before the foot reaches the
slider on the zipper tape.
Lower the needle slightly into the fabric.
Raise the foot and open the zipper.
Lower the foot and stitch the remainder of the
seam.
i
Slider
o
5 cm (2”)
4 Close the zipper and spread the fabric open flat
with the right side up.
Baste the upper fabric and zipper tape together.
!0
Basting
5 Reattach zipper foot E with the left pin.
Sew 1 cm (3/8") across the end of the opening
with reverse stitches. Stitch through the fabric and
zipper tape.
!1
End of the opening
6 Stop sewing about 5 cm (2”) from the top of the
zipper.
Lower the needle slightly into the fabric, raise the
foot, remove the basting stitches and open the
zipper.
!2
Basting Stitches
7 Move the slider behind the presser foot.
Lower the presser foot and stitch the remainder of
the seam.
After finishing, remove the basting stitches.
!3
Basting stitches
