AAASewing.com
24
9
0
Auto
1
2
3
05
4
Sewing on Buttons
Machine setting
Pattern
#05
Foot
F: Satin stitch foot
Thread tension
Auto
Feed dog
Dropped
Unthread the needle. Adjust the stitch width to match
the needle swing with the span of the holes on the
button, by pressing the plus (+) or minus (Ð) key.
Rethread the needle and lower the presser foot to
hold the button in place.
Turn the handwheel toward you to check if the needle
enters both left and right holes on the button.
Depress the foot control to sew 10 stitches and stop
the machine.
Raise the foot and draw out the fabric, and trim both
needle and bobbin threads at the beginning of stitches
but leaving 20 cm (8ý) tails at the end.
Pull the bobbin thread to pick the needle thread out to
the wrong side of the fabric and tie them together.
*
After finish sewing, raise the feed dog by shifting the
drop feed lever to the original position.
1 2
3 4 5
1
2
3
4
1
2
3
4
5
6
Janome 6260QC Instruction Manual
Janomesewing machine
www.aaasewing.com
6260QC Owners Manual/ User Guide
