6
Dropping the Feed Dog
The feed dog can be lowered by the drop feed lever
for sewing on buttons, manual embroidery etc.
Push the drop feed lever to the direction A to lower the
feed dog.
Push the lever to the direction B to raise the feed dog,
it will return to the up position when starting the
machine.
NOTE: The feed dog should be in up position for
normal sewing.
Adjusting the Foot Pressure
The foot pressure control dial should be set at “ 3 ” for
regular sewing.
Reduce the pressure to “ 2 ” for appliqué, cutwork,
drawn work and basting.
Set the dial at “ 1 ” when sewing the extra fine fabrics.
Changing the Presser Foot
To snap off:
Raise the needle and presser foot.
Press the lever on the back of the foot holder and the
foot will drop off.
To snap on:
Place the presser foot so the pin on the foot lies just
under the groove of the foot holder.
Lower the foot holder to lock the foot in place.
Lever
Pin
Groove
Detaching and Attaching the Presser Foot
To detach:
Raise the presser bar and turn the setscrew counter-
clockwise to remove it.
Remove the foot holder.
To attach:
Align the hole in the foot holder with the threaded hole
in the presser bar and setscrew through the hole.
Tighten the setscrew by turning it clockwise.
Setscrew
Hole on the holder
Threaded Hole
3
2
1
2
1
1
3
2
1
1
2
3
1
2
1
2
1
2
1
2
1
2
3
1
2
3
A
B
Summary of Contents for 6019QC
Page 1: ...INSTRUCTION BOOK...
