22
(A)
(B)
1
2
3
4
5
4
3
2
0
1
2
3
4
1
2
3
1
2
4
3
5
Automatic Buttonhole
Machine setting
Pattern
#1
Foot
R: Automatic buttonhole foot
Thread tension
1 ~ 5
Stitch width
4 ~ 6.5
Stitch length
0.5 ~ 1
NOTES: The size of buttonhole is automatically set
by placing the button in the rear of the
automatic buttonhole foot R.
The button holder of the foot takes a button
size up to 2.5 cm (1˝) in diameter.
Use the interfacing on the stretch fabrics.
Raise the needle and foot. Place the automatic
buttonhole foot with its pin just under the groove of
the foot holder. Lower the presser bar to attach the
automatic buttonhole foot.
Groove
Pin
Pull the button holder to the back (A), and place
the button in it. Push back the button holder toward
you (B) to hold the button.
Button holder
NOTE: If the button is extremely thick, make a test
buttonhole. If it is difficult to fit the button
through the test buttonhole, lengthen the
buttonhole by pulling the button holder back
to create a gap.
Gap
Pull the buttonhole lever downward as far as it will
go.
Buttonhole lever
1
2
3
4
5
1
2
3
1
2
3
4
5
Summary of Contents for 6019QC
Page 1: ...INSTRUCTION BOOK...
